Architectural & structural steel · Sheffield
Steel,strucktrue.
Staircases, balustrades, gates and structural steel: drawn, cut, welded and finished under one roof in Attercliffe.
01Services
What we
make.
Seven lines of work, one workshop. For homeowners, architects and builders. Figures are guide starting points for a typical project, confirmed in writing after a site measure.
-
Staircases
Straight, spiral, helical and floating flights. Stringers, treads and landings, trial-assembled before they leave the yard.
Typical project starts from£6,500 – £9,000
-
Balustrades & handrails
Bar, flat, mesh or glass infill. Stairs, landings, terraces and Juliet balconies.
Typical project starts from£1,400 – £2,200
-
Gates & railings
Driveway and garden gates, estate railings, frames ready for automation.
Typical project starts from£1,900 – £3,400
-
Structural steel & canopies
Beams, columns, box frames and entrance canopies, made to your engineer’s drawings.
Typical project starts from£2,400 – £4,800
-
Bespoke architectural metalwork
Screens, brackets, fire surrounds, signage, and the awkward one-off nobody else will price.
Typical project starts from£450 – £1,200
-
Repairs & restoration
Site welding, section replacement and careful repair of old ironwork, matched to what is already there.
Typical project starts from£160 – £600
-
Powder coating & finishing
Shot blast, zinc primer and powder coat in any RAL colour. Galvanising by arrangement.
Typical project starts from£90 – £350
02Process
How a piece
is made.
One gate leaf, five stages. The drawing builds as you read.
Design
We measure on site, then draw. You get a dimensioned general arrangement to approve before any steel is ordered, and your architect or engineer gets the same file.
Output · approved drawing and cutting list
Cut
Sections are sawn and mitred to the list, plate is profiled, holes are drilled. Every part is marked with its drawing reference so nothing is guessed at the bench.
Output · a labelled kit of parts
Weld
Parts are jigged square, tacked, checked, then fully welded. Visible joints are dressed flush. Structural welds follow the engineer’s specification.
Output · one true, square frame
Finish
Shot blast, then the coating the job calls for: zinc primer, galvanising, powder coat in your RAL colour, or a waxed mill finish for interiors.
Output · steel that stays the colour you chose
Install
The people who made it fit it. Posts set plumb, fixings to suit the structure, clearances checked, site left swept.
Output · hung, level and signed off
03Selected studies
On the
drawing board.
Concept studies. These four sheets are drawings made for this preview, not photographs and not built client work. Open a sheet for its specification.
04Enquiry
Tell us what
needs making.
A rough sketch and three measurements are enough to start. We reply with questions, then a guide figure, then a date to measure.
Concept preview: nothing is sent
Noted. On a real site this would now be on the bench.
Concept preview: nothing was sent or stored
05Visit
Come and see
the sparks.
- Workshop
- Emberlow Metalworks
Unit 6, Tiltwell Yard
Sparrowforge Lane, Attercliffe
Sheffield S9 0XX - Telephone
- 0114 496 0182
| Monday to Thursday | 7.30 – 16.30 |
|---|---|
| Friday | 7.30 – 13.00 |
| Saturday | By appointment |
| Sunday | Closed |
Welding is noisy and bright. Ring ahead and we will have the kettle on and a visor spare.